Singlemode - MTPAPC Pro Fiber Assembly
The iFiber Optix MTP/APC Pro Fiber Cable Assembly (I2750-24MTPA-PRO-FF-XXM-A) represents the pinnacle of high-density, high-speed fiber optic connectivity. Engineered from the ground up for 100G, 400G, and 800G network applications, these pre-terminated, factory-tested assemblies deliver unmatched signal integrity and rapid deployment capability.
By consolidating multiple fiber connections into a single MTP/APC interface, our Pro series assemblies dramatically reduce rack space consumption, simplify cable management, and eliminate the performance inconsistencies associated with field termination.
MTP/APC Pro Assembly — Product Overview
The I2750-24MTPA-PRO-FF-XXM-A combines OS2 ultra-low-loss singlemode fiber with precision APC-polished MTP connectors in a field-reversible, factory-tested trunk. Whether you're building out a spine-and-leaf architecture, upgrading a carrier-grade telecom hub, or future-proofing an enterprise backbone, the MTP/APC Pro delivers the density, precision, and flexibility modern networks demand.
The Power of MTP/APC Technology
- High-Density Connectivity MTP/APC assemblies replace multiple duplex LC connections with a single compact interface, housing 8 to 144 fibers within one connector — the definitive solution for data centers and enterprise backbones where rack space is at a premium.
- Precision APC Performance The 8° angled end-face directs back-reflections into the fiber cladding rather than the core, delivering superior Return Loss (typically better than −65 dB) and exceptional signal stability. Critical for coherent optical systems and high-speed DWDM applications.
- Plug-and-Play Deployment Every assembly is factory-terminated and 100% optically tested before shipment. Pre-terminated construction eliminates field splicing entirely, reducing installation time from hours to minutes with no specialized equipment required on-site.
- Low Insertion Loss & High Return Loss Engineered to meet and exceed IEEE and TIA/EIA standards. Optimized ferrule geometry and precision fiber alignment ensure consistent, repeatable performance across every connector — essential for maintaining link budgets in 400G ZR and 800G coherent optical applications.
Versatility and Configuration Options
The MTP/APC Pro series is available in multiple configurations to accommodate different polarity requirements, fiber counts, and installation environments.
APC Polish — 8° Angled
Industry-standard 8° angled end-face for superior return loss performance. Purpose-built for coherent optics, DWDM, and carrier-grade singlemode links.
Field-Reversible Polarity
Supports Type A, B, or C polarity adjustments on-the-fly — no reorders, no downtime. Engineers can reconfigure without replacing the entire assembly.
OS2 Singlemode Optimized
Ultra-low-loss 9/125µm OS2 fiber optimized for long-haul and inter-building links. Compatible with 10G, 40G, 100G, 400G, and emerging 800G transceivers.
Custom Length & Jacket
Available in plenum, riser, indoor/outdoor, and armored jacket types. Customizable lengths to exact specification for any installation environment.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | I2750-24MTPA-PRO-FF-XXM-A |
| Fiber Type | OS2 singlemode (9/125µm) |
| Connector Type | MTP/APC to MTP/APC |
| Polish Type | APC — 8° angled end-face |
| Fiber Count | 24-fiber standard; custom counts available |
| Insertion Loss | Meets and exceeds IEEE and TIA/EIA standards (see datasheet for typical and maximum values) |
| Return Loss | Typically better than −65 dB |
| Polarity | Field-reversible — Type A, B, or C |
| Jacket Material | Available in plenum, riser, indoor/outdoor, and armored options |
| Length | Customizable to specification (XX = length in meters) |
| Testing | 100% factory-terminated and optically tested prior to shipment |
Example configuration: I2750-24MTPA-PRO-FF-030M-A — 24-fiber MTP/APC Pro, OS2 singlemode, plenum-rated jacket, 30-meter length — ideal for spine-to-leaf links in a 400G hyperscale data center.
Key Applications
- Data Centers Ideal for spine-and-leaf architectures, high-density SAN environments, and hyperscale colocation facilities running 100G, 400G, or 800G top-of-rack switching and data center interconnect (DCI) applications.
- Telecom Hubs & Central Offices Purpose-built for carrier-grade telecom infrastructure requiring long-haul OS2 singlemode links with minimal insertion loss and maximum return loss. Reliable in environments where uptime is measured in nines.
- Enterprise Backbones High-capacity, scalable foundation for campus and inter-building fiber backbones. Field-reversible polarity means IT teams can adapt as equipment changes over time — reducing lifecycle costs without infrastructure overhauls.
- Cloud & Colocation Providers Fewer connectors to manage, faster installs, and consistent performance across every link. The density and reliability of MTP/APC Pro assemblies translate directly into lower OpEx and reduced risk of service-affecting faults.
How to Configure Your MTP/APC Pro Assembly
Follow these steps to specify the right assembly for your deployment — or contact our team for a guided configuration.
Confirm Fiber Count
Standard 24-fiber MTP handles most 400G and 800G deployments. Custom fiber counts are available — assess your switch port density and growth plan before specifying.
Verify APC Compatibility
APC connectors require APC-compatible transceivers and patch panels. Confirm your hardware supports 8° angled connectors before deploying in an APC infrastructure.
Specify Jacket & Length
Select the appropriate jacket rating (plenum, riser, armored) for your installation path. Specify exact cable length to minimize excess slack and maintain clean cable management.
Consult with Experts
Our team can validate polarity type (A, B, or C), confirm transceiver compatibility, and help configure part numbers for immediate quoting and fast lead times.