LC to LC Multimode OM2 Ultra Fiber Cable for High-Speed, Short-to-Medium Distance Data Transmission
The iFiber Optix LC to LC Multimode OM2 Ultra Fiber Cable is engineered for fast, reliable data transmission across short-to-medium distances — delivering a high-bandwidth OM2 multimode link between LC-terminated switches, servers, and patch panels in dense networking environments.
Supporting data rates up to 10 Gbps over distances up to 550 meters, this cable is ideal for LANs, data centers, telecom systems, and campus networks that require higher performance than OM1 can provide, while maintaining cost-effective multimode infrastructure.
LC-LC Multimode OM2 Ultra Fiber Cable
The LC to LC OM2 cable connects network devices using compact LC connectors on both ends and OM2 multimode fiber optimized for short-to-medium distance links. With a 50/125µm core and enhanced bandwidth, OM2 supports up to 10 Gbps over distances that exceed OM1 capabilities, making it well-suited for modern Ethernet and Fibre Channel applications in enterprise and data center environments.
Each LC connector features a small form factor, push-pull latch design that enables high-density terminations on patch panels and active equipment — allowing more fibers per rack unit while maintaining low-loss, stable connections across mission-critical links.
Performance Specifications
All iFiber Optix LC-LC OM2 assemblies are manufactured and tested to meet or exceed the following optical and mechanical performance specifications.
| Insertion Loss | 0.3 dB |
| Typical Insertion Loss | 0.2 dB |
| Return Loss | ≥ 20 dB |
| Mating Durability | <0.2 dB change (500 cycles) |
| Temperature Range | -40°C to +85°C |
| End A Connector | LC/UPC (Duplex) |
| End B Connector | LC/UPC (Duplex) |
| Fiber Core / Cladding | 50 / 125µm |
| Part Number | i2310-G-XX-2J |
| SPC GR-326 Protrusion | +50 / -100 nm |
Key Features
- High-Speed Data Transmission OM2 multimode fiber supports data rates up to 10 Gbps, delivering the throughput required for modern LAN, SAN, and data center applications over short-to-medium distances.
- Optimized for Medium Runs Engineered for distances up to 550 meters at 10 Gbps, OM2 is well-suited for campus networks, enterprise buildings, and inter-rack data center connections where OM1 is no longer sufficient.
- Low Insertion Loss & High Return Loss LC connectors provide low insertion loss (≤ 0.3 dB, 0.2 dB typical) and high return loss, minimizing signal degradation and maintaining stable performance across high-speed links.
- High-Density LC Design The compact LC form factor enables more terminations per rack unit than larger connector types, simplifying cable management in space-constrained data centers and telecom rooms.
- Durable Construction Constructed with high-quality materials, the LC-LC OM2 Ultra Fiber Cable is designed to withstand frequent handling, patching, and environmental variation in mission-critical installations.
- Standards-Compliant Performance Built to meet industry optical and geometric specifications, including GR-326 requirements, ensuring interoperability with existing LC-based connectivity hardware across your network.
Ideal Applications
LC-LC OM2 cables are used wherever high-speed, short-to-medium distance multimode links are required in dense, performance-critical environments.
Data Centers
Connects servers, storage arrays, and core switches with 10 Gbps-capable OM2 links, supporting structured cabling inside racks and across rows in high-density environments.
Local Area Networks
Provides fast, reliable Ethernet links in enterprise offices and campus LANs where high-speed connectivity is required between wiring closets and network distribution points.
Telecommunication Systems
Supports short-to-medium distance telecom backbones and interconnects where OM2 multimode fiber delivers the necessary bandwidth without moving to singlemode.
Campus Networks
Ideal for connecting buildings and distribution points across a campus where runs fall within OM2 distance limits at 10 Gbps and higher bandwidth is required than OM1 can provide.
Enterprise Networks
Used in enterprise-grade LAN and SAN environments to link switches, routers, and application servers over medium-distance multimode fibers.
High-Traffic Communication Hubs
Supports high-density, high-traffic connectivity in core network nodes, aggregation points, and telecom rooms that depend on reliable 10 Gbps performance.
How to Configure Your LC-LC OM2 Assembly
Use these steps to select the right LC-LC OM2 cable configuration for your network deployment.
Define Distance & Bandwidth
Confirm the required data rates and link lengths. OM2 multimode fiber supports up to 10 Gbps over distances up to 550 meters; for longer runs or higher speeds, evaluate OM3, OM4, or singlemode options as part of your roadmap.
Verify Connector Compatibility
Ensure that both endpoints of the link are LC-terminated. If one side uses a different connector type (SC, ST, MTRJ), specify a mixed-connector assembly instead of LC-LC to avoid additional adapters and extra loss.
Select Length & Jacket Type
Choose standard or custom lengths that match rack-to-rack and room-to-room distances while minimizing slack. Specify PVC (OFNR) for standard riser applications, OFNP plenum for air-handling spaces, or specialized jackets for unique environmental requirements.
Plan for Future Expansion
Consider how your network will evolve — whether you will migrate to OM3/OM4 or singlemode in future phases. Selecting OM2 LC-LC assemblies now can provide the needed headroom over OM1 while aligning with long-term upgrade strategies.
Why Choose iFiber Optix?
- Quality Assurance Every LC-LC OM2 assembly is manufactured to strict optical and mechanical tolerances and tested prior to shipment to ensure consistent insertion loss, return loss, and long-term reliability.
- Custom Configurations Custom cable lengths, jacket types (PVC, plenum, LSZH, indoor/outdoor), labeling, and bulk quantities are available to match your deployment standards and documentation requirements.
- High-Density Connectivity Expertise Our LC-based solutions are designed for high-density environments, helping you maximize rack space and streamline fiber management in data centers and telecom facilities.
- End-to-End Support From link budgeting and cable selection to large-scale deployment planning, iFiber Optix can assist with specifying LC-LC OM2 assemblies that align with your technical and operational goals.
Request Information
Need help selecting the right LC-LC OM2 fiber cables or designing a custom configuration? Our team is ready to support your next deployment.